Browsing by Subject "Vapor deposition"
Now showing items 1-11 of 11
-
Article
Deposition and characterisation of TiAlBN coatings produced by direct electron-beam evaporation of Ti and Ti-Al-B-N material from a twin crucible source
(1999)TiAlBN coatings were synthesised by evaporating Ti and hot isostatically pressed TiAl0.68B3.67N2.44 material from a twin crucible source in an Ar plasma at 450°C. A combination of optical emission spectroscopy and partial ...
-
Article
Deposition and nanotribological characterization of Sub-100-nm thick protective Ti-based coatings for miniature applications
(2011)Ti-based protective thin films with thicknesses below 100 nm, intended for miniature applications were deposited using physical vapor deposition magnetron sputtering. X-ray diffraction (XRD), scanning electron microscopy, ...
-
Article
The effect of boron additions on the tribological behaviour of TiN coatings produced by electron-beam evaporative PVD
(1999)TiN coatings containing small amounts of boron were synthesized by electron beam evaporating a Ti-B alloy material from a single crucible source into a plasma comprising Ar or an Ar/N2 mixture at a substrate temperature ...
-
Article
Growth and transport properties of HT-Li xCoO 2 thin films deposited by pulsed laser deposition
(2012)The successful in situ growth of single phase, c-axis oriented, layered structured Li xCoO 2 thin films on (0 0 0 1) Al 2O 3 substrates by pulsed laser deposition is reported. Thin films were grown in an oxygen pressure ...
-
Article
Low-temperature growth of NiMnSb thin films by pulsed-laser deposition
(2002)We report the growth of thin films of the ferromagnetic half-Heusler alloy NiMnSb by pulsed-laser deposition on Si (111) and polycrystalline InAs substrates. Highly crystalline films are grown using low substrate temperatures ...
-
Article
Matrix assisted pulsed laser evaporation of Mn 12(Propionate) thin films
(2012)Single molecule magnets are of great interest due to a multitude of potential applications for some of which thin films are required. Traditional physical vapor deposition techniques are not suitable for the deposition of ...
-
Article
Matrix assisted pulsed laser evaporation of Mn 12(Propionate) thin films
(2012)Single molecule magnets are of great interest due to a multitude of potential applications for some of which thin films are required. Traditional physical vapor deposition techniques are not suitable for the deposition of ...
-
Article
Partially yttria-stabilized zirconia coatings produced under plasma-assisted EBPVD with bipolar pulsed bias and under electron bombardment-assisted positive bias conditions
(1997)Previous research using radio frequency (rf) plasma-assisted electron beam (EB) PVD to deposit partially yttria-stabilized zirconia (PYSZ) thermal barrier coatings has shown the benefits of this method in terms of structure ...
-
Article
Pulsed laser deposition and thermal characterization of Ni-doped La5Ca9Cu24O41 thin films
(2011)Highly b-axis oriented polycrystalline Ni-doped La5Ca 9Cu24O41 thin films have been grown on (0 0 1) SrTiO3 substrates using the pulsed laser deposition technique. EDX measurements have revealed nearly stoichiometric ...
-
Article
Pulsed laser deposition of highly textured La 5Ca 9Cu 24O 41 films on SrLaAlO 4 (1 0 0) and Gd 3Ga 5O 12 (1 0 0) substrates
(2012)The growth of La 5Ca 9Cu 24O 41 thin films on SrLaAlO 4 (1 0 0) and Gd 3Ga 5O 12 (1 0 0) substrates by pulsed laser deposition is reported in this paper. The influence of deposition process parameters, such as oxygen ...
-
Article
Thermal conductivity of Ni, Co, and Fe-doped La5Ca 9Cu24O41 thin films measured by the 3ω method
(2010)The effect of Ni-, Co- and Fe-substitution for Cu on the thermal conductivity of La5Ca9Cu24O41 thin films is investigated. Highly b-axis oriented polycrystalline films were grown onto MgO (100) substrates using the pulsed ...