Temperature programmed reduction of silica supported nickel catalysts
Theocharis, Charis R.
SourceColloid & Polymer Science
Google Scholar check
MetadataShow full item record
Nickel oxide promoted catalysts are prepared by simple precipitation, precipitation from homogeneous solution and impregnation methods and their reduction behavior is monitored with temperature programmed reduction (TPR) technique. The effect of different parameters such as metal loading, method of preparation and heat treatment temperature are also observed on the reducibility of the catalysts. It is observed that reduction temperature increases with the increase of calcination temperature. Results indicate that the interactions between nickel oxide and silica begin with the increase of calcination temperature which leads to the formation of nickel hydrosilicates and are responsible for high temperature reduction peaks. © 1993 Steinkopff-Verlag.
Showing items related by title, author, creator and subject.
Hadjiafxenti, A.; Gunduz, I. E.; Kyratsi, Theodora; Doumanidis, C. C.; Rebholz, Claus (2013)Self-propagating reactions in compacted pellets of continuously low-energy ball-milled aluminium (Al) and nickel (Ni) powders at a composition corresponding to AlNi3 were investigated. The formation of a bi-modal structure ...
Low-temperature catalytic decomposition of ethylene into H2 and secondary carbon nanotubes over Ni/CNTs Savva, Petros G.; Polychronopoulou, Kyriaki; Ryzkov, V. A.; Efstathiou, Angelos M. (2010)The present work reports on the production of H2 and secondary carbon nanotubes (CNTs) during catalytic decomposition of ethylene over a novel catalytic system, namely, nickel supported on carbon nanotubes (Ni/CNTs) at ...
Hadjiafxenti, A.; Gunduz, I. E.; Doumanidis, C. C.; Rebholz, Claus (2014)Low-energy ball milling of aluminum and nickel particles with an overall composition corresponding to the NiAl intermetallic phase was performed up to milling durations of 13 h. The milled powders and cold-compacted pellets ...