A comparative study of the steam reforming of phenol towards H2 production over natural calcite, dolomite and olivine materials
Date
2010Source
Applied Catalysis B: EnvironmentalVolume
95Issue
3-4Pages
255-269Google Scholar check
Keyword(s):
Metadata
Show full item recordAbstract
Pre-calcined (air, 850 °C) naturally occurring calcite, dolomite and olivine materials were studied for phenol steam reforming towards H2 production. The effect of reaction temperature, feed volume flow rate, and hydrogen concentration in the feed stream on phenol conversion, H2 product concentration and selectivity were investigated. The increase of reaction temperature in the 650-800 °C range led to the increase of phenol conversion and H2-selectivity for the calcite and dolomite materials, while the opposite behaviour was observed for the olivine material. An increase of phenol conversion was obtained with decreasing Gas Hourly Space Velocity, GHSV in the 40,000-80,000 h-1 range for all three natural materials studied. The lower activity (per gram basis) of pre-calcined olivine compared to that of pre-calcined calcite and dolomite at high reaction temperatures (750-800 °C) is suggested to be linked to the increased extent of reducibility of α-Fe2O3 and Fe3O4, and of FexMg1-xOy and Ca2Fe2O5 phases likely present (X-ray diffraction measurements) in the pre-calcined olivine into less reactive FeIIO and Fe0 under reaction conditions. X-ray photoelectron spectroscopy studies performed over the raw olivine revealed also the presence of FeIIO. Phenol steam reforming reaction followed by transient isothermal oxidation allowed the measurement of "carbonaceous" species that react towards CO and CO2 and which accumulate during phenol steam reforming, as a function of reaction temperature and time on stream. The lower amount of "carbonaceous" species formed on the surface of calcined olivine under steam reforming of phenol at 650 °C, as well as its higher site reactivity compared to calcite and dolomite are considered likely reasons for the higher activity and H2-yield exhibited by olivine at 650 °C compared to calcite and dolomite. Comparative studies regarding the CO2 adsorption characteristics over pre-calcined calcite, dolomite and olivine using in situ CO2-DRIFTS and CO2-TPDs were conducted. It was found that olivine accommodates significantly lower amounts of CO2 compared to calcite and dolomite. The effect of hydrogen concentration in the feed stream towards phenol steam reforming activity on dolomite was found to be negative. In situ DRIFTS studies using H2/H2O/Ar and H2/H2O/CO2/He gas atmospheres suggested that this effect is related to the substantial decrease in the rate of water dissociation to form -OH active species caused by the simultaneous reversible interaction of H2 with the MgO/CaO surfaces. © 2010 Elsevier B.V. All rights reserved.
Collections
Cite as
Related items
Showing items related by title, author, creator and subject.
-
Article
Surface reactivity of LaCoO3 and Ru/LaCoO3 towards CO, CO2 and C3H8: Effect of H2 and O2 pretreatments
Álvarez-Galván, M. C.; Constantinou, D. A.; Navarro, R. M.; Villoria, J. A.; Fierro, José Luis García; Efstathiou, Angelos M. (2011)The differences in surface reactivity of LaCoO3 and Ru/LaCoO3 solids after pre-treatment in a hydrogen or oxygen gas atmosphere towards oxidative steam reforming (OSR) of propane was probed by performing temperature-programmed ...
-
Article
Low-temperature purification of gas streams from phenol by steam reforming over novel supported-Rh catalysts
Constantinou, D. A.; Efstathiou, Angelos M. (2010)The purification of gas streams from phenol at low-temperatures (350-550 °C) was investigated by its reaction with steam over novel catalytic systems, namely 0.5 wt% Rh supported on Ce0.15Zr0.85O2, Ce0.15Zr0.83Mg0.02O2 and ...
-
Article
Ceria-based materials for hydrogen production via hydrocarbon steam reforming and water-gas shift reactions
Polychronopoulou, Kyriaki; Kalamaras, Christos M.; Efstathiou, Angelos M. (2011)This review paper provides an overview of the use of ceria-based catalytic materials towards the industrial hydrogen production via the hydrocarbon steam reforming and the water-gas shift reaction routes with a focus on ...