On the potential use of quarry waste material for CO2 sequestration
Petallidou, Klito C.
Vasiliades, Michalis A.
Efstathiou, Angelos M.
SourceJournal of CO2 Utilization
Google Scholar check
MetadataShow full item record
The use of solid wastes rich in Ca2+, Mg2+ and Fe2+ for the ex situ sequestration of CO2 could provide an economically and technologically viable option for the reduction of anthropogenic CO2 emissions. Here, we investigate for the first time the potential use of waste materials from mafic rock quarries as a feedstock for the sequestration of CO2 by ex situ mineral carbonation. The experimental procedure was performed on a waste material from a dolerite quarry operating in the Troodos ophiolite (Cyprus). The ball milling process was applied to this quarry waste in order to create nanomaterials with enhanced CO2 adsorption capacity. Through CO2 chemisorption followed by temperature-programmed desorption (CO2-TPD) experiments, the optimum ball milling conditions were found (20 h of wet ball milling with 50 wt% ethanol as process control agent), leading to an enhancement of the CO2-storage capacity of the waste material by a factor of ∼120. This enhancement of CO2 uptake is closely related to (i) the reduction of particle size to the nanoscale, (ii) the structural disordering of the constituent silicate minerals, and (iii) the presence of augite nanocrystals after ball milling. The experimental results suggest that waste materials from dolerite quarries may indeed be used as feedstock for the ex situ mineralization of CO2. They also strongly demonstrate that ball milling is a very promising technique for optimizing the ex situ carbonation of this waste materialthus the proposed methodology could be a fundamental part of a future carbon sequestration strategy. © 2016 Elsevier Ltd.
Showing items related by title, author, creator and subject.
Nanoporous activated carbon cloth as a versatile material for hydrogen adsorption, selective gas separation and electrochemical energy storage Kostoglou, N.; Koczwara, C.; Prehal, C.; Terziyska, V.; Babic, B.; Matovic, B.; Constantinides, G.; Tampaxis, C.; Charalambopoulou, Georgia; Steriotis, T.; Hinder, S.; Baker, M. A.; Polychronopoulou, K.; Doumanidis, C. C.; Paris, O.; Mitterer, C.; Rebholz, Claus (2017)The efficient storage of energy combined with a minimum carbon footprint is still considered one of the major challenges towards the transition to a progressive, sustainable and environmental friendly society on a global ...
Ultrafast pulsed laser deposition of carbon nanostructures: Structural and optical characterization Pervolaraki, Maria; Komninou, P.; Kioseoglou, J.; Othonos, Andreas S.; Giapintzakis, Ioannis (2013)Carbon nanostructured materials were obtained by high-repetition rate pulsed laser ablation of a graphite target using a train of 10-ps duration pulses at 1064 nm in different pressures of high-purity Ar gas. It is ...
Microstructure and nanomechanical properties of pulsed excimer laser deposited DLC:Ag films: Enhanced nanotribological response Constantinou, M.; Pervolaraki, M.; Nikolaou, P.; Prouskas, C.; Patsalas, P.; Kelires, P.; Giapintzakis, John; Constantinides, G. (2017)Diamond-like carbon:silver (DLC:Ag) thin films, with metal contents as high as 16.8 at.%, have been deposited on silicon substrates using pulsed excimer laser deposition