Show simple item record

dc.contributor.authorZheng, Kailunen
dc.contributor.authorPolitis, Denis J.en
dc.contributor.authorWang, Liliangen
dc.contributor.authorLin, Jianguoen
dc.creatorZheng, Kailunen
dc.creatorPolitis, Denis J.en
dc.creatorWang, Liliangen
dc.creatorLin, Jianguoen
dc.date.accessioned2021-01-27T10:17:47Z
dc.date.available2021-01-27T10:17:47Z
dc.date.issued2018
dc.identifier.issn2588-8404
dc.identifier.urihttp://gnosis.library.ucy.ac.cy/handle/7/63795
dc.description.abstractAluminium alloys are being increasingly utilised in the automotive and aerospace industries to reduce the weight of vehicles. Extensive research has been conducted to overcome the poor ductility of aluminium alloys at room temperature and improve formability of the materials, to enable complex-shaped panel components to be manufactured. To this end, this paper contains a comprehensive review of widely used forming processes for aluminium alloys, under cold, warm and hot forming conditions, and the material characteristics and equipment used for each process. Based on a detailed analysis from the view of industrial requirements, recent progress in experimentation techniques are reviewed addressing the limitations and improvements of specific forming processes. Furthermore, material modelling methods at both cold and elevated temperature forming conditions have been presented. In addition, finite element (FE) simulations with the implementation of material models are discussed. This review article intends to provide a systematic guide for process designers to choose the most appropriate sheet forming technique for specific industrial applications.en
dc.language.isoenen
dc.sourceInternational Journal of Lightweight Materials and Manufactureen
dc.source.urihttp://www.sciencedirect.com/science/article/pii/S258884041830012X
dc.titleA review on forming techniques for manufacturing lightweight complex—shaped aluminium panel componentsen
dc.typeinfo:eu-repo/semantics/article
dc.identifier.doi10.1016/j.ijlmm.2018.03.006
dc.description.volume1
dc.description.issue2
dc.description.startingpage55
dc.description.endingpage80
dc.author.facultyΠολυτεχνική Σχολή / Faculty of Engineering
dc.author.departmentΤμήμα Μηχανικών Μηχανολογίας και Κατασκευαστικής / Department of Mechanical and Manufacturing Engineering
dc.type.uhtypeArticleen
dc.source.abbreviationInternational Journal of Lightweight Materials and Manufactureen
dc.contributor.orcidPolitis, Denis J. [0000-0002-1684-0923]
dc.gnosis.orcid0000-0002-1684-0923


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record