Search
Now showing items 21-30 of 100
Fabrication of nanorods by metal evaporation inside the pores of ultra-thin porous alumina templates
(2007)
Porous alumina has attracted a great deal of attention as a template material for the growth of nanowires and nanodots. Typically, the pores have a high aspect ratio, which forbids the use of evaporation techniques for ...
Microstructure, mechanical and tribological properties of reactive magnetron sputtered titanium carbide coatings
(Affiliation: Dept. of Mechanical and Manufacturing Engineering, University of Cyprus, 1678, Nicosia, CyprusAffiliation: Dept. PA-ATM01/SGP21, Engineering Process Technology, Robert Bosch GmbH, Postfach 300220, 70442 Stuttgart, GermanyAffiliation: Dept. of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, United StatesCorrespondence Address: Polycarpou, A. A.Dept. PA-ATM01/SGP21, Engineering Process Technology, Robert Bosch GmbH, Postfach 300220, 70442 Stuttgart, Germanyemail: polycarp@uiuc.edu, 2008)
This study describes the correlation between the microstructure, mechanical and tribological properties of Ti 1-xCx coatings (with x being in the range of 0-0.5), deposited by reactive magnetron sputtering from a Ti target ...
2009 ICMCTF
(2009)
Broom-like and flower-like heterostructures of silver molybdate through pH controlled self assembly
(2012)
Silver molybdate microrods are selfassembled into micron sized, broom-like and flowerlike structures. Our investigations indicate that through a simple hydrothermal process, large scale production of such structure is ...
Deposition and characterization of nitrogen containing stainless steel coatings prepared by reactive magnetron sputtering
(1996)
Nitrogen containing austenitic stainless steel coatings were deposited with nitrogen concentrations up to 14.1 at% using electron enhanced closed field unbalanced DC magnetron sputtering. The reactive gas flow was controlled ...
Modeling of the self-propagating reactions of nickel and aluminum multilayered foils
(2009)
In this study, we performed simulations of self-propagating reactions of nanoscale nickel-aluminum multilayers using numerical methods. The model employs two-dimensional heat transfer equations coupled with heat generation ...
Structure, mechanical and tribological properties of nitrogen-containing chromium coatings prepared by reactive magnetron sputtering
(1999)
Cr(1-x)N(x) coatings were deposited by magnetron sputtering at a substrate temperature of 200°C onto AISI 316 stainless-steel substrates immersed in an Ar/N2 plasma. The goal of this investigation was to study the influence ...
Structure, hardness and mechanical properties of magnetron-sputtered titanium-aluminium boride films
(1999)
TiAlB films nominally 2 μm thick were produced by simultaneous sputtering from TiAl and TiB2 targets onto Si-(110) and AISI316 stainless steel substrate materials at a temperature of 170°C. The influence of different B/Al ...
Correlation of elastic modulus, hardness and density for sputtered TiAlBN thin films
(2006)
This paper describes the correlation between the elastic modulus, hardness and density of mainly X-ray amorphous TiAlxByNz (0.29 ≤ x ≤ 1.32
Structure, mechanical and tribological properties of Ti-B-N and Ti-Al-B-N multiphase thin films produced by electron-beam evaporation
(1998)
Titanium-based multiphase ceramic coatings were deposited by electron-beam plasma-assisted physical vapor deposition, evaporating mixtures of Ti, TiB2, and (Ti0.6Al0.4)B2.19N1.47 material in Ar or Ar/N2 plasmas. All exhibited ...